Quick Change Chuck Jaws
Toll Free  (832) 343-0377
Email:  edwin.g@ag-cncworks.com

Cut Set Up Time and Eliminate Re-boring Soft Saws!

Made in the USA!
 
Home Contact
Us		 List of
Distributors		 Sitemap Quick Change
 Chuck Jaws

How it Works!


 

When the Lock Screw is tightened into the lock screw detent of the insert, three directional insert clamping occurs.  Clamping force is up against the end of the J-LOC master jaw, back against the Lock Pin and securely in contact with the side of the tongue.  This creates a no clearance situation to insure rigidity and repeatability.
A & G CNC Works, LLC
4540 West 34th Street  STD B
Houston  Texas   77092
Phone:  (832) 343-0377
Email:  edwin.g@ag-cncworks.com